Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Beckmann+Egle ====== {{:BeckmannEgle:beckmann-und-egle-100.png}} This driver supports the serial "Mini-Terminals" made by [[http://www.bue.de|Beckmann+Egle]]: <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/mt20x4-kit.jpg?format=raw" width="200" height="173" /> </code> With the upcoming 0.10 version of lcd4linux, the new [[http://www.bue.de/produkte-und-dienstleistungen/ct.html|CompactTerminals]] will be supported, too. <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/ct20x4-kit.jpg?format=raw" width="600" height="455" /> </code> These controllers provide a lot of additional features, and my be extended with various modules: key module: <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-key2x4.jpg?format=raw" width="300" height="222" /> </code> I/O module: <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-io.jpg?format=raw" width="300" height="213" /> </code> LAN module: <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-net-a.jpg?format=raw" width="300" height="136" /> </code> With the current lcd4linux 0.9.11, only the following "!MultiTerminal" display types are supported and must be specified in the configuration with the //Type// key: |Type|Columns|Rows| |0|16|1| |1|16|2| |2|16|4| |3|20|1| |4|20|2| |5|20|4| |6|24|1| |7|24|2| |8|32|1| |9|32|2| |10|40|1| |11|40|2| |12|40|4| ===== Configuration: ===== The driver needs/supports the following entries in lcd4linux.conf: **Display**: "BLC100x")\\\ **Port**: serial device the device is attached to (e.g."/dev/ttyS2")\\\ **Type**: [[:columns]]x[[:rows]], e.g."40x4")\\\ ---- beckmannegle_09.txt Last modified: 2020/07/17 18:33(external edit)