====== Beckmann+Egle ======

{{:BeckmannEgle:beckmann-und-egle-100.png}}

This driver supports the serial "Mini-Terminals" made by [[http://www.bue.de|Beckmann+Egle]]:

<code>
#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/mt20x4-kit.jpg?format=raw" width="200" height="173" />
</code>


With the upcoming 0.10 version of lcd4linux, the new [[http://www.bue.de/produkte-und-dienstleistungen/ct.html|CompactTerminals]] will be supported, too.

<code>
#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/ct20x4-kit.jpg?format=raw" width="600" height="455" />
</code>


These controllers provide a lot of additional features, and my be extended with various modules:

 key module:
<code>
#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-key2x4.jpg?format=raw" width="300" height="222" />
</code>


 I/O module:
<code>
#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-io.jpg?format=raw" width="300" height="213" />
</code>


 LAN module:
<code>
#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-net-a.jpg?format=raw" width="300" height="136" />
</code>


With the current lcd4linux 0.9.11, only the following "!MultiTerminal" display types are supported and must be specified in the configuration with the //Type// key:

|Type|Columns|Rows|
|0|16|1|
|1|16|2|
|2|16|4|
|3|20|1|
|4|20|2|
|5|20|4|
|6|24|1|
|7|24|2|
|8|32|1|
|9|32|2|
|10|40|1|
|11|40|2|
|12|40|4|

===== Configuration: =====

The driver needs/supports the following entries in lcd4linux.conf:

**Display**: "BLC100x")\\\

**Port**: serial device the device is attached to (e.g."/dev/ttyS2")\\\

**Type**: [[:columns]]x[[:rows]], e.g."40x4")\\\


----