Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. {{:CwLinux:cwlinux_logo.png}} Cwlinux offers two LCD kits: **CW1602**: a 16x2 text display with either serial or USB interface: Front View:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/bare_lcd.jpg?format=raw" width="221" height="100" /> </code> Serial Version:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/serial_lcd2.jpg?format=raw" width="214" height="100" /> </code> USB Version:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/usb_lcd2.jpg?format=raw" width="223" height="100" /> </code> **CW12232**: A graphics display (122x32 pixels, 20x4 characters) again with either serial or USB interface. Serial Version:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/serial_lcd.jpg?format=raw" width="300" height="83" /> </code> USB Version:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/usb_lcd.jpg?format=raw" width="300" height="83" /> </code> The really cool fact with their displays is that the whole thing is mounted into a half-height 5 1/4 drive bay: Character LCD with Keypad:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/lcdfront2.jpg?format=raw" width="328" height="91" /> </code> Graphic LCD:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/lcdfront.jpg?format=raw" width="300" height="99" /> </code> Graphic LCD with Keypad:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/black_keypad.jpg?format=raw" width="348" height="86" /> </code> ... or white:\\\ <code> #!html <img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/CwLinux/white_keypad.jpg?format=raw" width="365" height="82" /> </code> ===== Configuration: ===== The driver needs/supports the following entries in lcd4linux.conf: **Display**: "CW1602" or "CW12232 \\\ **Port**: e.g. "/dev/ttyS1"(serial) or "/dev/usb/tts/1"(USB)\\\ **Speed**: should be "19200"\\\ **Brightness**: 0 (backlight off) to 8 (backlight max)\\\ ---- cwlinux_09.txt Last modified: 2020/07/17 18:33(external edit)