Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. **MatrixOrbitalGX Driver** {{:GX24064-TC-BBI.jpg)]] [[Image(GX24064-WB-BBI.jpg}} This driver supports the USB interface GX Series graphics display modules by [[http://www.matrixorbital.com/lcd-gx-typhoon-c-1_13.html|Matrix Orbital Corporation]]. ===== Display Section ===== <code> Display <name> { Driver 'MatrixOrbitalGX' Size <string> Font <string> Backlight <number> Backlight_R <number> Backlight_G <number> Backlight_B <number> Invert <0|1> } </code> ---- ===== Parameters ===== |**Driver**|'MatrixOrbitalGX'| |**Size**|<Width>x<Height> for now only '240x64' is available | |**Font**|font size, specified as <width>x<height> (only '6x8' supported at the moment| |**Backlight**|initial backlight state for model that have single led for backlight, 0..255| |**Backlight_R**|initial Red backlight state for model that have RGB backlight, 0..255| |**Backlight_G**|initial Green backlight state for model that have RGB backlight, 0..255| |**Backlight_B**|initial Blue backlight state for model that have RGB backlight, 0..255| |**Invert**|If 1 then inverts the screen, 0 or 1| Driver will decide, which backlight method will be used by checking the connected device's model. GX24064-WB-BBI -> Single LED backlight GX24064-TC-BBI -> RGB backlight ---- ===== Examples ===== <code> Display MatrixOrbitalGX { Driver 'MatrixOrbitalGX' Size '240x64' Font '6x8' Backlight 110 Backlight_R 110 Backlight_G 50 Backlight_B 110 Invert 0 } </code> ---- ===== Plugins ===== The driver provides the following functions: |LCD::backlight(n)|set backlight brightness (0..255)| |LCD::backlightRGB(n1,n2,n3)|set (R,G,B) backlight brightness (0..255,0..255,0..255)| ---- matrixorbitalgx.txt Last modified: 2020/07/17 18:33(external edit)