Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. This driver supports the [[http://www.phanderson.com/lcd106/lcd107.html|PHAnderson]] serial-to-HD44780 controller. ---- ===== Display Section ===== <code> Display <name> { Driver 'PHAnderson' Port <string> Speed <number> Size <string> Blackligth <number> Bootscreen <string> WRITE <number> READ <number> BOOT <number> } </code> ---- ===== Parameters ===== |**Driver**|'PHAnderson'| |**Port**|serial device the display is attached to (e.g.'/dev/ttyS2')| |**Speed**|the baud rate from the display must match this value. Possible values are 2400, 9600 and 19200| |**Size**|<columns>x<rows> e.g. "16x2"| |**Blacklight**|initial backlight brightness, 0..255| |**Bootscreen**|initial message at LCD power on| |**WRITE**|write eeprom execution timing in millisecondes, default is 170ms| |**READ**|read eeprom execution timing in millisecondes, default is 10ms| |**BOOT**|write boot message execution timing in millisecondes, default is 300ms| ---- ===== Example ===== <code> Display LCDTerm { Driver 'PHAnderson' Port '/dev/tts/0' Speed 19200 Size '24x2' Blackligth 100 Bootscreen '123456789012345678901234ABCDEFGHIJKLMNOPQRSTUVWX' WRITE 170 READ 10 BOOT 300 } </code> ---- phanderson.txt Last modified: 2020/07/17 18:33(external edit)