sample_09

lcd4linux.conf.sample

#Display LCD2041
#Port /dev/ttyS2
#Speed 19200
#Contrast 160

Display HD44780
#Port 0x378
Port /dev/parports/1
Size 24x2
#Delay 503

#Display BLC100x
#Port /dev/ttyS2
#Type 20x4

#Display USBLCD
#Port /dev/usb/usblcd
#Size 20x4

#Display PalmPilot
#Port /dev/ttyS2
#Speed 4800
#size 20x4
#font 6x8
#pixel 1+0
#gap 0x0
#border 2

#Display PPM
#size 20x4
#font 5x8
#pixel 3+0
#gap -1x-1
#border 10
#foreground \#102000
#halfground \#70c000
#background \#80d000

#Display PNG
#size 20x4
#font 5x8
#pixel 2+0
#gap -1x-1
#border 5
#foreground \#102000
#halfground \#70c000
#background \#80d000

#Display X11
#size 20x5
#font 5x8
#pixel 1+0
#gap -1x-1
#border 1\\\

#foreground \#102000
#halfground \#90c000
#background \#a0d000

#Display Text
#size 40x8
#TextBar 1

#Display SIN
#Port /dev/tty9

Row1 "Busy %cb%% $r14cs+cb"
Row2 "Load%l1%L$r14l1"

#Row1 "*** %o %v ***"
#Row2 "%p CPU  %r MB RAM"
#Row3 "Busy %cb%% $r10cs+cb"
#Row4 "Load%l1%L$r10l1"

# e(x)ecute command in %x*
# Row5 %x1
# Row6 %x2
# x1 tail -1 /var/log/messages
# x2 echo $X1 | cut -b25-
# Note: PATH=/usr/local/bin:/usr/bin:/bin
# Note: $X1 .. $X8 is the text of lines x1 .. x8
#
# Tick_x1 10  # every 10 ticks
# Delay_x1 2  # every 2 seconds
# Max_x1 50 # max for scaling bars (default 100), value SHOULD be numeric ;-)
# Min_x1 10 # min (default 0), SHOULD be != Max_x1

#Row1 "Load%l1%L$r10cs+cb"
#Row2 "Disk%dm $R10dr+dw"
#Row3 "Net %nm $R10nr+nw"
#Row4 "ISDN%im $r10ii+io"
#Row4 "DSL %tm $r10ti+to"
#Row5 "Temp%s2°$r10s1+s2"

#Row1 "$u3l1$u3cb$u3cs $u3mu$u3ma$u3ms $u3dr$u3dw $u3nr$u3nw $u3ii$u3io"
#Row2 " "
#Row3 " "
#Row4 "CPU MEM IO IP"

Tick 100
Tack 400
Tau 500

Overload 2.0

# flash bp-Bar if below Battwarning
# I use Row6 "Bat%bp%bs%bd$r10bp+bp"
# which gives a nice flash effect
# default is 10

Battwarning 10

SetiDir /etc/setiathome

# normal local mbox
# Mailbox1 /var/spool/mail/michi

# POP3 mail @ machine
# Mailbox2 pop3:user:pass@machine

# IMAP4 mail folder @ machine
# Mailbox3 imap4:user:pass@machine/folder

# News server on 'server' group at.linux
# Mailbox4 nntp:server/at.linux

# Full syntax of pop3/imap4/nntp is:
# [[:user[:pass]]@]machine[[::port]][[::dir]]
#
# display total/unseen mails/news of Mailbox3
# Row6 "Mails %e3/%u3"

# delay query of MailboxN in seconds (default = 5)
Delay_e1 5
Delay_e2 20
Delay_e3 20
Delay_e4 120

Sensor1 /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp1
Sensor1_min 30
Sensor1_max 50

Sensor2 /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp2
Sensor2_min 30
Sensor2_max 50

Sensor3 /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp3
Sensor3_min 30
Sensor3_max 50
  • sample_09.txt
  • Last modified: 2020/07/17 18:33
  • (external edit)