Beckmann+Egle

This driver supports the serial “Mini-Terminals” made by Beckmann+Egle:

#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/mt20x4-kit.jpg?format=raw" width="200" height="173" />

With the upcoming 0.10 version of lcd4linux, the new CompactTerminals will be supported, too.

#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/ct20x4-kit.jpg?format=raw" width="600" height="455" />

These controllers provide a lot of additional features, and my be extended with various modules:

key module:

#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-key2x4.jpg?format=raw" width="300" height="222" />

I/O module:

#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-io.jpg?format=raw" width="300" height="213" />

LAN module:

#!html
<img src="https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-net-a.jpg?format=raw" width="300" height="136" />

With the current lcd4linux 0.9.11, only the following “!MultiTerminal” display types are supported and must be specified in the configuration with the Type key:

The driver needs/supports the following entries in lcd4linux.conf:

Display: “BLC100x”)\

Port: serial device the device is attached to (e.g.“/dev/ttyS2”)\

Type: columnsxrows, e.g.“40×4”)\