This driver supports the PHAnderson serial-to-HD44780 controller.
Display Section
Display <name> {
Driver 'PHAnderson'
Port <string>
Speed <number>
Size <string>
Blackligth <number>
Bootscreen <string>
WRITE <number>
READ <number>
BOOT <number>
}
Parameters
| Driver | 'PHAnderson' |
| Port | serial device the display is attached to (e.g.'/dev/ttyS2') |
| Speed | the baud rate from the display must match this value. Possible values are 2400, 9600 and 19200 |
| Size | <columns>x<rows> e.g. “16×2“ |
| Blacklight | initial backlight brightness, 0..255 |
| Bootscreen | initial message at LCD power on |
| WRITE | write eeprom execution timing in millisecondes, default is 170ms |
| READ | read eeprom execution timing in millisecondes, default is 10ms |
| BOOT | write boot message execution timing in millisecondes, default is 300ms |
Example
Display LCDTerm {
Driver 'PHAnderson'
Port '/dev/tts/0'
Speed 19200
Size '24x2'
Blackligth 100
Bootscreen '123456789012345678901234ABCDEFGHIJKLMNOPQRSTUVWX'
WRITE 170
READ 10
BOOT 300
}